DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
697
DGS-3000-26TC:admin#show dscp trust 1-8
Command: show dscp trust 1-8
Port DSCP-Trust
---- ----------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
DGS-3000-26TC:admin#
config dscp map
69-17
Description
This command is used to configure DSCP mapping. The mapping of DSCP to priority will be used
to determine the priority of the packet (which will be then used to determine the scheduling queue)
when the port is in DSCP trust state.
The mapping of DSCP to color will be used to determine the initial color of the packet when the
policing function of the packet is color aware and the packet is DSCP-trusted.
The DSCP-to-DSCP mapping is used in the swap of DSCP of the packet when the packet is
ingresses to the port. The remaining processing of the packet will base on the new DSCP. By
default, the DSCP is mapped to the same DSCP.
These DSCP mapping will take effect at the same time when IP packet ingress from a DSCP-
trusted port.
Format
config dscp map {[<portlist> | all]} [dscp_priority <dscp_list> to <priority 0-7> | dscp_dscp
<dscp_list> to <dscp 0-63> | dscp_color <dscp_list> to [green | red | yellow]]
Parameters
<portlist>
- (Optional) Enter the list of port used for this configuration here.
all
– (Optional) Specify that all the ports will be included in this configuration.
dscp_priority
- Specify a list of DSCP value to be mapped to a specific priority.
<dscp_list>
- Enter the DSCP priority list here.
to
- Specify that the above or following parameter will be mapped to the previously mentioned
parameter.
<priority 0-7>
- Enter the result priority of mapping.
dscp_dscp
- Specify a list of DSCP value to be mapped to a specific DSCP.
<dscp_list>
- Enter the DSCP to DSCP list here.
to
- Specify that the above or following parameter will be mapped to the previously mentioned
parameter.
<dscp 0-63>
- Enter the result DSCP of mapping.
dscp_color
- Specify a list of DSCP value to be mapped to a specific color.
<dscp_list>
- Enter the DSCP to color list here.
to
- Specify that the above or following parameter will be mapped to the previously mentioned
Summary of Contents for DGS-3000 series
Page 1: ......