DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
709
Example
To upload firmware image to an RCP server:
DGS-3000-26TC:admin#upload firmware_toRCP rcp: [email protected]/DGS-
3000-1.12.had src_file 1.12.had
Command: upload firmware_toRCP rcp: [email protected]/DGS-3000-1.12.had
src_file 1.12.had
Connecting to server............... Done.
Upload firmware.................... Done.
DGS-3000-26TC:admin#
download cfg_fromRCP
71-3
Description
This command is used to download the configuration file from a Remote Copy Protocol (RCP)
server to the Switch.
Format
download cfg_fromRCP [{username <username 15>} {<ipaddr>} src_file <path_filename 64>
| rcp: <string {user@}ipaddr/path_filename>] {dest_file <pathname 64>}
Parameters
username
- (Optional) Specify the remote user name on the RCP server.
<username 15>
- Enter the remote user name on the RCP server.
<ipaddr>
- (Optional) Enter the IP address of the RCP server.
src_file
- Specify the path and file name of the switch configuration file on the RCP server. The
maximum length is 64.
<path_filename 64>
- Enter the path and file name of the switch configuration file on the RCP
server. The maximum length is 64.
rcp:
- Specify the path and the login credentials of the configuration file located on the RCP
server that will be used for the download.
<string {user@}ipaddr/path_filename>
- Enter the path and the login credentials of the
firmware file located on the RCP server that will be used for the download. The string may
contain up to 128 characters.
dest_file
- (Optional) Specify the path and file name of the destination file on the device.
<pathname 64>
- Enter the path and file name of the destination file.
Restrictions
Only Administrators can issue this command.
Example
To download a configuration file from an RCP server:
Summary of Contents for DGS-3000 series
Page 1: ......
