DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
157
DGS-3000-26TC:admin#config configuration config.cfg boot_up
Command: config configuration config.cfg boot_up
Success.
DGS-3000-26TC:admin#
save
15-3
Description
This command is used to save the current configuration to a file.
Format
save {[config <pathname 64> | log | all]}
Parameters
config
- (Optional) Specify to save the configuration.
<pathname 64>
- Enter the pathname of the indicated pathname. The pathname can be up to
64 characters long.
log
- (Optional) Specify to save the log.
all
- (Optional) Specify to save changes to an active , current configuration to the log file.
Restrictions
Only Administrators and Operators can issue this command.
Example
To save the current configuration to the bootup configuration file:
DGS-3000-26TC:admin#save
Command: save
Saving all configurations to NV-RAM.......... Done.
DGS-3000-26TC:admin#
To save the current configuration to a destination file, named 1:
DGS-3000-26TC:admin#save config 1
Command: save config 1
Saving all configurations to NV-RAM.......... Done.
DGS-3000-26TC:admin#
To save a log to NV-RAM:
Summary of Contents for DGS-3000 series
Page 1: ......