D-Link DGS-3000 series Reference Manual Download

Page: 598 / 909

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

594

tag_member_port

- Specify the port or range of ports that will become tagged members of the

multicast VLAN.

<portlist>

- Enter the list of port to be configured here.

state

- Specify that the multicast VLAN for a chosen VLAN should be enabled or disabled.

enable

- Specify to enable the multicast VLAN for a chosen VLAN.

disable

- Specify to disable the multicast VLAN for a chosen VLAN.

replace_source_ip

- Before forwarding the report packet sent by the host, the source IP address

in the join packet must be replaced by this IP address. If 0.0.0.0 is specified, the source IP
address will not be replaced.

<ipaddr>

- Enter the replace source IP address here.

remap_priority

- The remap priority value to be associated with the data traffic to be forwarded

on the multicast VLAN. If none is specified, the packet’s original priority is used. The default
setting is none.

<value 0-7>

- Enter the remap priority value here. This value must be between 0 and 7.

none

- Specify that the remap priority value will be set to none.

replace_priority

- (Optional) Specify that the packet priority will be changed to the

remap_priority, but only if remap_priority is set.

Restrictions

Only Administrators, Operators and Power-Users can issue this command.

Example

To configure an IGMP snooping multicast VLAN with the name “v1”, make ports 1 and 3 members
of the VLAN, and set the state to enable:

DGS-3000-26TC:admin#config igmp_snooping multicast_vlan mv1 add member_port 1,3
state enable

Command: config igmp_snooping multicast_vlan mv1 add member_port 1,3 state
enable

Success.

DGS-3000-26TC:admin#

config igmp_snooping multicast_vlan_group_profile

55-10

Description

This command is used to configure an IGMP snooping multicast group profile on the Switch and
add or delete multicast addresses for the profile.

Format

config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast_address_list>

Parameters

<profile_name 1-32>

- Enter the multicast VLAN group name here. This name can be up to 32

characters long.

add

- Adds a multicast address list to or from this multicast VLAN profile.

delete

- Deletes a multicast address list to or from this multicast VLAN profile.

<mcast_address_list>

- Enter the multicast VLAN IP address here. It can be a continuous single

Summary of Contents for DGS-3000 series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3000 series

Reviews:

Related manuals for DGS-3000 series

Brands by name

Popular brands

D-Link DGS-3000 series, Reference Manual

Search results

Summary of Contents for DGS-3000 series

Reviews:

Related manuals for DGS-3000 series

Brands by name

Popular brands