DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
176
Parameters
md
- (Optional) Specify the maintenance domain name.
<string 22>
- Enter the maintenance domain name used here. This name can be up to 22
characters long.
md_index
- (Optional) Specify the maintenance domain index.
<uint 1-4294967295>
- Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma
- (Optional) Specify the maintenance association name.
<string 22>
- Enter the maintenance association name used here. This name can be up to
22 characters long.
ma_index
- (Optional) Specify the maintenance association index.
<uint 1-4294967295>
- Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
Restrictions
None.
Example
To show the CFM faults:
DGS-3000-26TC:admin#show cfm fault
Command: show cfm fault
MD Name MA Name MEPID Status
----------- ----------- ----- ---------------------------------
op_domain op1 1 Cross-connect CCM Received
DGS-3000-26TC:admin#
show cfm port
16-18
Description
This command is used to show MEPs and MIPs created on a port.
Format
show cfm port <port> {level <int 0-7> | direction [inward | outward] | vlanid <vlanid 1-4094>}
Parameters
<port>
- Enter the port number used here.
level
- (Optional) Specify the MD Level. If not specified, all levels are shown.
<int 0-7>
- Enter the MD level value here. This value must be between 0 and 7.
direction
- (Optional) Specify the MEP direction.
inward
- Specify that the MEP direction will be inward facing.
outward
- Specify that the MEP direction will be outward facing.
If not specified, both directions and the MIP are shown.
vlanid
- (Optional) Specify the VLAN identifier. If not specified, all VLANs are shown.
<vlanid 1-4094>
- Enter the VLAN ID used here. This value must be between 1 and 4094.
Summary of Contents for DGS-3000 series
Page 1: ......