DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
43
Parameters
local
- Specify the authentication protocol as local.
radius_eap
- Specify the authentication protocol as RADIUS EAP.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1X authentication protocol to RADIUS EAP:
DGS-3000-26TC:admin#config 802.1x auth_protocol radius_eap
Command: config 802.1x auth_protocol radius_eap
Success.
DGS-3000-26TC:admin#
config 802.1x fwd_pdu system
4-7
Description
This command is used to globally control the forwarding of EAPOL PDU. When 802.1X
functionality is disabled globally or for a port, and if 802.1X fwd_pdu is enabled both globally and
for the port, a received EAPOL packet on the port will be flooded in the same VLAN to those ports
for which 802.1X fwd_pdu is enabled and 802.1X is disabled (globally or just for the port). The
default state is disabled.
Format
config 802.1x fwd_pdu system [enable | disable]
Parameters
enable
- Enables the forwarding of EAPOL PDU.
disable
- Disables the forwarding of EAPOL PDU.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure forwarding of EAPOL PDU system state enable:
Summary of Contents for DGS-3000 series
Page 1: ......