101
Click Multiple APs to set up 4 different SSIDs to deploy a shared WLAN. Users can add
or limit the properties for each SSID, increasing the flexibility and efficiency of the
network.
(1.)
Enable:
check it for enable or not.
(2.)
Band
: select the frequency from the drop down list.
(3.)
SSID:
please enter different SSID in each class.
(4.)
Data Rate:
please select the data transmission rate.
(5.)
Access:
defined the access type.
a. LAN+WAN:
the client can access to the Internet and connect to 11N Mobile
Router’s GUI to setup.
b. WAN:
the client can only access to the Internet.
(6.)
Active Client List:
display the properties of the client which is connecting
successfully.
(7.)
Apply Changes:
Please click
Apply Changes
to initiate or click
Reset
to cancel.
4.
Network Type
Κ
Please select “
Infrastructure
” or “
Ad hoc
.” The default is “
Infrastructure
.” The selection is
disabled when wireless mode is selected to AP.
5. SSID
Κ
Please input your wireless network name. Default is “11N_Mini_Router”.
6. Channel
Width
Please select “
20MHZ
” or “
40MHZ
” channel width to change the transmission channels.
Summary of Contents for BR486n
