June 2017
http://www.sharedband.com 1 of 3
Sharedband Bonded Broadband
Sharedband Power Router 2
Configuration Guide
Introduction
This document is to instruct you how to configure the Sharedband software on Sharedband Power Router 2.
Note: This guide assumes that the Router is not pre-configured.
Preparation
Make sure you have the Sharedband user details for the Community you wish to setup.
The Procedure
Do not skip any of the steps, as the
configuration is not activated until ‘
Save and reboot
’ is selected
at the end of the last step.
Step 1:
Log onto the Web interface of the router (default address
http://192.168.3.17
). The default login is
'
admin
' and password '
Bonding123
'.
Step 2:
Click '
Settings
' > '
Sharedband Service Configuration
'.
