Crestron UC-P100-S Supplemental Manual Download Page 222

Page: 222 / 422

214

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

•

Simultaneously Ring to a Contact: The preset number will ring simultaneously

when a phone receives an incoming call.

•

Forward to Voice Mail: Incoming calls are forwarded to voicemail.

•

Forward to Delegates: If delegates are assigned to a line, all incoming calls can

be forwarded directly to the delegates.

•

Simultaneously Ring to Delegates: If delegates are assigned to a line, delegates'

phones can be enabled to simultaneously ring when the user receive incoming

calls.

•

Simultaneously Ring to Team Call: If team-call group assigned to a user’s line,

team-call members' phones can be enabled to simultaneously ring when the user

receives incoming calls. For more information on how to configure a team-call

group, refer to “Set Up a Team-Call Group” on page 215.

Skype for Business phones support the redirected call information sent by the SIP server

with Diversion header, per draft-levy-sip-diversion-08, or History-info header, per RFC

4244. The Diversion/History-info header is used to inform the phone of a call’s history.

For example, when a phone has been set to enable call forward, the Diversion/History-

info header allows the receiving phone to indicate where the call was from, and from

which phone number it was forwarded.

Call forward can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure diversion/history-info feature.
Parameter:

features.fwd_diversion_enable

Local

Phone User Interface

Configure call forward.

Details of the Configuration Parameter

Parameter

Permitted Values

Default

features.fwd_diversion_enable

0 or 1

Description:

Enables or disables the phone to present the diversion information when an incoming call is

forwarded to a phone.

Disabled

Enabled

Web User Interface:

Features->General Information->Diversion/History-Info

Phone User Interface:

None

Enable Call Forward via the Phone User Interface

Tap Setting > Features > Call Forward.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands