356
•
UC-P100-S/UC-P110-S Phones for Skype for Business
Supplemental Guide – DOC. 8412A
Enter the syslog server port in the Port field.
Select the transport type from the Syslog Transport Type drop-down list. It
configures the transport protocol the phone uses when exporting log messages
to the syslog server.
Select the log level from the Syslog Level drop-down list. When choosing a log
level, all events of an equal or higher severity level are included and events of a
lower severity level are excluded.
Select the facility from the Syslog Facility drop-down list. It configures the
facility that generates the log messages.
Select Enabled or Disabled from the Syslog Prepend Mac drop-down list. It
configures whether the uploaded log messages have the phone MAC address or
not.
Click Confirm to accept the changes.
View the Syslog Message
The syslog file stored in the specified folder on the syslog server can be viewed. The
location of the folder may differ from the syslog server. For more information, refer to
the network resources.
The following figure shows a portion of the syslog:
Syslog
Capture Packets
Packets can be captured in two ways: via the Web User Interface or using the Ethernet
software. The captured packets can be analyzed for troubleshooting purposes.
