Crestron UC-P100-S Supplemental Manual Download Page 14

Page: 14 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Physical Features

This section lists the available physical features of Skype for Business phones.

•

7 in. 1024 x 600 pixel color touch screen with backlight (adjustable tilt on

UC-PHONE-S-PLUS

•

One Skype for Business account

•

HD Voice: HD Codec, HD Handset, HD Speaker

•

20 dedicated hard keys

•

One RJ-9 (4P4C) handset port

•

One RJ-9 (4P4C) headset port

•

Two RJ-45 10/100/1000Mbps Ethernet ports

•

4 LEDs: power, mute, headset, speakerphone

•

Power over Ethernet (IEEE 802.3af)

Technical Features

Telephony Features

•

Call Options: emergency call, call waiting, call hold, call mute, call forward, call

transfer, group pickup and audio conference.

•

Basic Features: live dialpad, dial plan, hotline, caller identity, auto answer.

Codecs and Voice Features

•

Wideband codec: G.722, SILK_WB

•

Narrowband codec: G.711, G.726, G.729, iLBC, G723, SILK_NB

•

VAD, CNG, AEC, PLC, AJB, AGC

•

Full-duplex speakerphone with AEC

Network Features

•

NAT Traversal: STUN, TURN and ICE

•

IP assignment: Static/DHCP

•

VLAN assignment: LLDP/Static/DHCP/CDP

•

Bridge mode for PC port

•

HTTP/HTTPS server

•

DNS client

•

DHCP server

•

IPv6 support

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands