Crestron UC-P100-S Supplemental Manual Download Page 71

Page: 71 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

IPv6 Address Assignment Method

Supported IPv6 address assignment methods:

•

Manual Assignment: An IPv6 address and other configuration parameters (e.g.,

DNS server) for the phone can be statically configured by an administrator.

•

Stateless Address Autoconfiguration (SLAAC)/ICMPv6: SLAAC is one of the

most convenient methods to assign IP addresses to IPv6 nodes. SLAAC requires

no manual configuration of the phone, minimal (if any) configuration of routers,

and no additional servers. To use IPv6 SLAAC, the phone must be connected to a

network with at least one IPv6 router connected. This router is configured by the

network administrator and sends out Router Advertisement announcements

onto the link. These announcements can allow the on-link connected phone to

configure itself with IPv6 address, as specified in RFC 4862.

•

Stateful DHCPv6: The Dynamic Host Configuration Protocol for IPv6 (DHCPv6)

has been standardized by the IETF through RFC 3315. DHCPv6 enables DHCP

servers to pass configuration parameters such as IPv6 network addresses to IPv6

nodes. It offers the capability of automatic allocation of reusable network

addresses and additional configuration flexibility. This protocol is a stateful

counterpart to “IPv6 Stateless Address Autoconfiguration” (

RFC 2462

), and can

be used separately or concurrently with the latter to obtain configuration

parameters.

IPv6 Address and Network Setting Resources

The following table lists where the phone obtains the IPv6 address and other network

settings:

DHCPv6

SLAAC

(ICMPv6)

How the phone obtains the IPv6 address and network settings?

Disabled

The static IPv6 address and other network settings must be manually

configured.

Enabled

Disabled

The phone can obtain the IPv6 address and other network settings via

DHCPv6.

Enabled

If the SLAAC server is working, the server can specify the phone to obtain the

IPv6 address and other network settings either from DHCPv6 or SLAAC.
If the SLAAC server is not working, the phone will try to obtain the IPv6

address and other network settings via DHCPv6.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands