246
•
UC-P100-S/UC-P110-S Phones for Skype for Business
Supplemental Guide – DOC. 8412A
Configure the Paging List via the Phone User Interface
Tap Setting > Features > Paging List.
Tap the right side of an entry.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the
Address field. Valid multicast IP addresses range from 224.0.0.0 to
239.255.255.255.
Enter the group name in the Label field.
Tap Save.
Repeat steps 2 to 6 to add more paging groups.
Receive an RTP Stream
Skype for Business phones can receive an RTP stream from the pre-configured multicast
address(es) without SIP signaling, and can handle the incoming multicast paging calls
differently depending on how Paging Barge and Paging Priority Active are configured.
The Paging Barge parameter defines the priority of the voice call in progress, and
decides how the phone handles incoming multicast paging calls when there is already a
voice call in progress. If the parameter is configured as Disabled, all incoming multicast
paging calls will be automatically ignored. If the value of the parameter is the priority
value, incoming multicast paging calls with higher or equal priority are automatically
answered and the ones with lower priority are ignored.
The Paging Priority Active parameter determines how the phone handles incoming
multicast paging calls when there is already a multicast paging call in progress. If the
parameter is configured as Disabled, the phone will automatically ignore all incoming
multicast paging calls. If the parameter is configured as Enabled, incoming multicast
paging calls with equal or higher priority are automatically answered, and those with
lower priority are ignored.
