Crestron UC-P100-S Supplemental Manual Download Page 93

Page: 93 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

Provisioning methods priority can be configured using the configuration files only.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configures the provisioning methods

priority.
Parameter:

static.auto_provision.custom.protect

Details of the Configuration Parameter

Parameter

Permitted Values

Default

static.auto_provision.custom.protect

0 or 1

Description:

Enables or disables the provisioning methods priority.

Disabled, different provisioning methods (central provisioning, in-band provisioning and manual

provisioning) have no priority. The subsequent operations always override previous operations

regardless of the provisioning method being used.

Enabled, different provisioning methods have priority (phone/web user interface>in-band

provisioning>central provisioning>factory defaults). The provision with high priority will not be

overwritten by the provision with low priority.

Web User Interface:

None

Phone User Interface:

None

Configuration Files and Resource Files

When phones are configured with the central provisioning method, they will request to

download the configuration files and resource files from the provisioning server.

The following sections describe the details of the configuration files and resource files:

•

Configuration Files

•

Resource Files

•

Obtaining Configuration Files/Resource Files

Configuration Files

The configuration files are valid CFG files that can be created or edited using a text

editor such as UltraEdit. An administrator can deploy and maintain a block of phones

automatically through configuration files stored on a provisioning server.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands