Crestron UC-P100-S Supplemental Manual Download Page 10

Page: 10 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

This brief section describes the conventions used in the summary table and configuration

parameter table. In order to read the tables and successfully perform configuration

changes, an understanding of these conventions is necessary.

Summary Table Format

The following summary table indicates three methods; central provisioning, web user

interface, and phone user interface, that can be used to configure a feature. Note that

the types of methods used for each feature will vary.

The central provisioning method requires parameters to be configured in the CFG

format. Configuration files provided by Crestron Files can be downloaded from the

DOCUMENTATION section of each product page on the Crestron website. For more

information on configuration files, refer to “Configuration Files” on page 85. As shown

below, the table specifies the configuration file name and the corresponding parameters.

That is, the <MAC>.cfg file contains the account.1.auto_answer parameter, and the

<y0000000000xx>.cfg file contains the features.auto_answer_delay parameter.

The web user interface method requires configuring features by navigating to the

specified link. This navigation URL enables the user to quickly locate the webpage where

the feature can be configured.

Summary Table Format

Configuration Parameter Table Format

The following configuration parameter table describes

how to configure a parameter to

make a

feature (e.g., auto answer) work. The table also indicates three methods for

configuring the feature (parameter name, web user interface, and phone user interface).

Configure the static DNS feature.

static.network.static_dns_enable
Configure static DNS address.

static.network.primary_dns

static.network.secondary_dns

Web User Interface

Configure the static DNS feature

Configure static DNS address.

http://<phoneIPAddress>/servlet?p=networ
k&q=load

Phone User Interface

Configure the static DNS feature
Configure static DNS address.

Feature explanation

Configuration file name

Parameter name

Navigation URL

Provisioning methods

Manual provisioning

ethods

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands