70
•
UC-P100-S/UC-P110-S Phones for Skype for Business
Supplemental Guide – DOC. 8412A
In the ICMPv6 Status section, select Enabled or Disabled from the Active drop-
down list.
Click Confirm to accept the change. A dialog box pops up to prompt that
settings will take effect after a reboot.
Click OK to reboot the phone.
Configure IPv6 Address Assignment Method via the Phone User Interface
Tap Setting > Advanced.
Enter the Admin password (default password: admin), and then tap OK.
Tap Network on the left side of the display, and then tap 1. WAN Port.
Tap then entry in the IP Mode field, and then tap
IPv4 & IPv6 or IPv6.
Tap Save. The phone will prompt for a reboot.
Tap OK to reboot the phone.
Configure IPv6 Static DNS When DHCP is Used via the Phone User Interface
Tap Setting > Advanced.
Enter the Admin password (default password: admin), and then tap OK.
Tap Network on the left side of the display, and then tap 3. IPv6.
Select DHCP from the 1. Type field drop-down list.
Select Enabled from the 2. Static DNS field drop-down list.
Enter the addresses of the primary and secondary DNS servers in the 3. Pri.DNS
and Sec.DNS fields.
Tap Save. The phone will prompt for a reboot.
Tap OK to reboot the phone.
Quality of Service
Quality of Service (QoS) is the ability to provide different priorities for different packets
in the network, allowing the transport of traffic with special requirements. QoS
guarantees are important for applications that require fixed bit rate and are delay
sensitive when the network capacity is insufficient. There are four major QoS factors to
be considered when configuring a modern QoS implementation: bandwidth, delay, jitter
and loss.
QoS provides better network service through the following features:
•
Supporting dedicated bandwidth
•
Improving loss characteristics
•
Avoiding and managing network congestion
