Crestron UC-P100-S Supplemental Manual Download Page 299

Page: 299 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

291

Select Enabled or Disabled from the Dual Headset drop-down list.

Click Confirm to accept.

Sending Volume

Configure the sending volume of currently engaged audio devices (handset,

speakerphone, or headset) when the phone is in use.

Sending volume can be configured using the configuration files only.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the sending volume of the

speaker.
Parameter:

voice.handfree_send
Configure the sending volume of the

handset.
Parameter:

voice.handset_send
Configure the sending volume of the

headset.
Parameter:

voice.headset_send

Details of the Configuration Parameters

Parameter

Permitted Values

Default

voice.handfree_send

Integer from -50 to 50

Description:

Configures the sending volume of the speaker.

Note: We recommend that this parameter be modified cautiously. An unreasonable value may

render the voice quality bad. If the parameter is changed, the phone will reboot to make the

change take effect.

Web User Interface:

None

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands