Crestron UC-P100-S Supplemental Manual Download Page 2

Page: 2 / 422

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a

limited non-exclusive, non-transferable Software Development Tools License Agreement. Crestron product operating system

software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these

Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement

The product warranty can be found at

www.crestron.com/legal/sales-terms-conditions-warranties

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/legal/open-

source-software

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United

States and/or other countries. Active Directory, Microsoft Teams, and Skype for Business are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks, registered trademarks,

and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors

in typography or photography.This document was written by the Technical Publications department at Crestron.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands