Crestron UC-P100-S Supplemental Manual Download Page 354

Page: 354 / 422

346

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Configure the upload path for the local log

files.
Parameter:

static.auto_provision.local_log.backup.path

Local

Web User Interface

Configure the Local log feature.

Navigate to:
http://<phoneIPAddress>/servlet?p=setting
s-config&q=load

Details of the Configuration Parameters

Parameter

Permitted Values

Default

static.local_log.enable

0 or 1

Description:

Enables or disables recording the log files locally.

Disabled, the phone will not record log files locally. Previously recorded log files are still kept on

the phone.

Enabled, the phone will record log files locally. The local log files can be uploaded to the

provisioning server, or a specific server, or they can be exported to the local PC.

Note: Do not disable this feature.

Web User Interface:

Settings > Configuration > Local Log Switch

Phone User Interface:

None

static.local_log.level

5 or 6

Refer to the

following content

Description:

Configures the level of local log information to be reported to the sys.log file and sipsignal.log file.

Normal

Debug

Default Value: 6

Web User Interface:

Settings > Configuration > Local Log Level

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands