Crestron UC-P100-S Supplemental Manual Download Page 80

Page: 80 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

NOTE:

For voice and SIP packets, the Skype for Business phone obtains DSCP info from

the network policy if LLDP feature is enabled, which takes precedence over manual

settings. For more information on LLDP, refer to LLDP on page 50.

QoS can be configured using the configuration files or locally.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the DSCPs for voice packets and

SIP packets.
Parameters:

static.network.qos.audiotos

static.network.qos.signaltos

Local

Web User Interface

Configure the DSCPs for voice packets and

SIP packets.

Navigate to:
http://<phoneIPAddress>/servlet?p=netwo
rk-adv&q=load

Details of the Configuration Parameters

Parameter

Permitted Values

Default

static.network.qos.audiotos

Integer from 0 to 63

Description:

Configures the DSCP (Differentiated Services Code Point) for voice packets. The default DSCP

value for RTP packets is 46 (Expedited Forwarding).

Note: If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > Voice QoS (0~63)

Phone User Interface:

None
static.network.qos.signaltos

Integer from 0 to 63

Description:

Configures the DSCP (Differentiated Services Code Point) for SIP packets. The default DSCP

value for SIP packets is 26 (Assured Forwarding).

Note: If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > SIP QoS (0~63)

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands