Crestron UC-P100-S Supplemental Manual Download Page 56

Page: 56 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Details of the Configuration Parameters

Parameter

Permitted Values

Default

static.network.lldp.enable

0 or 1

Description:

Enables or disables the LLDP (Linker Layer Discovery Protocol) feature on the phone.

Disabled

Enabled, the phone will attempt to determine its VLAN ID through LLDP.

Note: If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > LLDP > Active

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > LLDP > LLDP Status
static.network.lldp.packet_interval

Integer from 1 to 3600

Description:

Configures the interval (in seconds) for the phone to send the LLDP (Linker Layer Discovery

Protocol) request.

Note: This feature works only if the value of the parameter “static.network.lldp.enable” is set to 1

(Enabled). If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > LLDP > Packet Interval (1~3600s)

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > LLDP > Packet Interval

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands