Crestron UC-P100-S Supplemental Manual Download Page 238

Page: 238 / 422

230

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Parameter

Permitted Values

Default

features.intercom.tone

0 or 1

Description:

Enables or disables playing a warning tone when answering an intercom call.

Disabled

Enabled

Note: This feature works only if the value of the parameter “features.intercom.allow” is set to 1

(Enabled).

Web User Interface:

Features > Intercom > Intercom Tone

Phone User Interface:

Menu > Setting > Features > Intercom > Intercom Tone

features.intercom.barge

0 or 1

Description:

Enables or disables answering an incoming intercom call while there is already an active call on

the phone.

Disabled, the phone will handle an incoming intercom call like a normal incoming call while there

is already an active call on the phone.

Enabled, the phone will automatically answer the intercom call while there is already an active

call on the phone and place the active call on hold.

Note: This feature works only if the values of parameters “features.intercom.allow” and

“call_waiting.enable” are set to 1 (Enabled).

Web User Interface:

Features > Intercom > Intercom Barge

Phone User Interface:

Menu > Setting > Features > Intercom > Intercom Barge

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Crestron UC-P100-S, Supplemental Manual, Page: 238 / 422

Search results

Summary of Contents for UC-P100-S

Reviews: