Crestron UC-P100-S Supplemental Manual Download Page 123

Page: 123 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

115

Click Confirm to accept the change.

Always Online

The Always Online feature allows the phone to maintain the current status until it is

manually changed. For example, the current status of the phone is Available, if the

always online feature is enabled, then the phone status will stay Available until it is

manually changed.

Always Online can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure always on line.
Parameter:

sfb.always_online.enable

Local

Web User Interface

Configure always on line.

Navigate to:
http://<phoneIPAddress>/servlet?p=accou
nt-basic&q=load&acc=0

Details of the Configuration Parameter

Parameter

Permitted Values

Default

sfb.always_online.enable

0 or 1

Description:

Enables or disables the phone to maintain current status until it is manually changed.

Disabled

Enabled

Note: If the phone status is set to Do Not Disturb (DND) before dialing an emergency number,

then the phone status will be changed to available after the emergency call even if the value of

this parameter is set to 1 (Enabled).

Web User Interface:

Account > Basic > Always Online

Phone User Interface:

Menu > Setting > Basic > Always Online

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands