Crestron UC-P100-S Supplemental Manual Download Page 240

Page: 240 / 422

232

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

To use the calendar feature on a phone, the user must sign into the phone using User

Sign-In or Web Sign-in method so the phone can display the Microsoft Exchange

calendar.

Calendar can be configured using the configuration files only.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the calendar feature.
Parameter:

sfb.calendar.enable
Configure the meeting reminder.
Parameter:

phone_setting.calendar_reminder
Configure the interval of meeting reminder.
Parameter:

phone_setting.calendar_reminder.interval
Configures the interval (in seconds) for the

phone to automatically check if any

calendars update available on Microsoft

Exchange Server.
Parameter:

phone_setting.calendar.update_time

Details of the Configuration Parameters

Parameter

Permitted Values

Default

sfb.calendar.enable

0 or 1

Description:

Enables or disables the calendar feature.

Disabled

Enabled

Web User Interface:

None

Phone User Interface:

None

phone_setting.calendar_reminder

0 or 1

Description:

Enables or disables the meeting reminder.

Disabled, the phone will not display reminders for any meeting.

Enabled, the phone will display reminders for all meetings.

Web User Interface:

Settings > Calendar > Reminder

Phone User Interface:

Menu > Setting > Basic > Calendar Settings > Reminder

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands