Crestron UC-P100-S Supplemental Manual Download Page 101

Page: 101 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

Parameter

Permitted Values

Default

static.auto_provision.repeat.enable

0 or 1

Description:

Triggers the auto provision repeatedly feature to on or off.

Off, the phone will not perform an auto provisioning process repeatedly.

On, the phone will perform an auto provisioning process repeatedly.

Web User Interface:

Settings > Auto Provision > Repeatedly

Phone User Interface:

None

static.auto_provision.repeat.minutes

Integer from 1 to 43200

1440

Description:

Configures the interval (in minutes) for the phone to perform an auto provisioning process

repeatedly.

Note: This feature works only if the value of the parameter “static.auto_provision.repeat.enable”

is set to 1 (On).

Web User Interface:

Settings > Auto Provision > Interval(Minutes)

Phone User Interface:

None

static.auto_provision.weekly.enable

0 or 1

Description:

Triggers the weekly feature to on or off.

Off

On, the phone will perform an auto provisioning process weekly.

Web User Interface:

Settings > Auto Provision > Weekly

Phone User Interface:

None

static.auto_provision.weekly.begin_time

Time from 00:00 to 23:59

00:00

Description:

Configures the begin time of the day for the phone to perform an auto provisioning process

weekly.

Note: This feature works only if the value of the parameter “static.auto_provision.weekly.enable”

is set to 1 (On).

Web User Interface:

Settings > Auto Provision > Time

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Crestron UC-P100-S, Supplemental Manual, Page: 101 / 422

Search results

Summary of Contents for UC-P100-S

Reviews: