Crestron UC-P100-S Supplemental Manual Download Page 100

Page: 100 / 422

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

•

Automatically check for configuration files and then download firmware at a

fixed interval or specific time.

The method of checking for configuration files is configurable.

Configuration changes can be performed using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the way for the phone to check for

configuration files.
Parameters:

static.auto_provision.power_on

static.auto_provision.repeat.enable

static.auto_provision.repeat.minutes

static.auto_provision.weekly.enable

static.auto_provision.weekly.begin_time

static.auto_provision.weekly.end_time

static.auto_provision.weekly.dayofweek
Specify the access URL of firmware.
Parameter:

static.firmware.url
Configure the phone to be reset to factory

after an upgrade.
Parameter:

static.auto_provision.reset_factory.enable

Local

Web User Interface

Configure the way for the phone to check for

configuration files.

Navigate to:
http://<phoneIPAddress>/servlet?p=settings
-autop&q=load

Details of the Configuration Parameters

Parameter

Permitted Values

Default

static.auto_provision.power_on

0 or 1

Description:

Triggers the power on feature to on or off.

Off, the phone will not perform an auto provisioning process when powered on.

On, the phone will perform an auto provisioning process when powered on.

Web User Interface:

Settings > Auto Provision > Power On

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands