Crestron UC-P100-S Supplemental Manual Download Page 261

Page: 261 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

253

Click Confirm to accept.

Configure Hot Desking Feature via the Phone User Interface:

Tap Setting > Features > Hot-Desking.

Select Enabled or Disabled in the Hot-Desking field.

Tap Save

Common Area Phone.

Common Area Phones (CAPs) are those Skype for Business phones that are not

associated with an individual user. Instead of being deployed in someone’s office, CAPs

are typically deployed in building lobbies, cafeterias, employee lounges, conference

rooms, and other places where a large number of people are likely to gather. Unlike other

phones on the Skype for Business server, which are typically maintained by using voice

policies and dial plans that are assigned to individual users, CAPs do not have individual

users assigned to them.

Common area phone can be configured using the following methods.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the Common Area Phone

feature.
Parameters:

features.set_as_cap.enable

features.voice_mail.enable

features.cap_presence.enable

features.redial.enable

features.exchange_connect.enable

features.sfb_directory.enable

phone_setting.search_contacts.enable

features.call_history.enable

features.paging.enable

Local

Web User Interface

Configure the Common Area Phone

feature.

Navigate to:
http://<phoneIPAddress>/servlet?p=feat
ures-general&q=load

Phone User Interface

Configure the Common Area Phone

feature.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands