Crestron UC-P100-S Supplemental Manual Download Page 61

Page: 61 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

In the CDP section, select Enabled or Disabled from the Active drop-down list.

Enter the time interval in the Packet Interval (1~3600s) field.

Click Confirm to accept the change. A dialog box pops up to prompt that

settings will take effect after a reboot.

Click OK to reboot the phone

Configure CDP Feature via the Phone User Interface

Tap Setting > Advanced

Enter the Admin password (default password: admin), and then tap OK.

Tap Network on the left side of the display, and then tap 6. CDP.

Set CDP Status to On or Off by tapping the desired setting

Enter the priority value (1-3600s) in the CDP Interval field.

Tap Save. The phone will prompt for a reboot.

Tap OK to reboot the phone.

Manual Configuration for VLAN in the Wired Network

VLAN is disabled on phones by default. VLAN can be configured for the Internet port and

PC port manually. Before configuring VLAN on the phone, the VLAN ID must be obtained

from the network administrator.

VLAN can be configured using the configuration files or locally.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure VLAN for the Internet port and

PC port manually.
Parameters:

static.network.vlan.internet_port_enable

static.network.vlan.internet_port_vid

static.network.vlan.internet_port_priority

static.network.vlan.pc_port_enable

static.network.vlan.pc_port_vid

static.network.vlan.pc_port_priority

Local

Web User Interface

Configure VLAN for the Internet port and

PC port manually.

Navigate to:
http://<phoneIPAddress>/servlet?p=netwo
rk-adv&q=load

Phone User Interface

Configure VLAN for the Internet port and

PC port manually.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Crestron UC-P100-S, Supplemental Manual, Page: 61 / 422

Search results

Summary of Contents for UC-P100-S

Reviews: