Crestron UC-P100-S Supplemental Manual Download Page 191

Page: 191 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

183

Call Log

Save Call Log

The call log contains call information such as remote party identification, time and date,

and call duration. It can be used to redial previous outgoing calls, return incoming calls,

and save contact information from call log lists to the contact directory.

Skype for Business phones maintain a local call log. The call log consists of four lists: All

Calls, Missed Calls, Placed Calls, and Received Calls. Each call log list supports up to 100

entries. To store call information, the save call log feature must be enabled in advance.

The call history information can be accessed via the phone user interface only.

Call log can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure call log feature.
Parameter:

features.save_call_history

Local

Web User Interface

Configure call log feature.

Navigate to:
http://<phoneIPAddress>/servlet?p=featu
res-general&q=load

Phone User Interface

Configure call log feature.

Details of the Configuration Parameter

Parameter

Permitted Values

Default

features.save_call_history

0 or 1

Description:

Enables or disables the phone to save the local call log.

Disabled, the phone cannot save the missed calls, placed calls, received calls and the forwarded

calls in the call log lists.

Enabled

Web User Interface:

Features > General Information > Save Call Log

Phone User Interface:

Menu > Setting > Features > History Setting > History Record

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands