Crestron UC-P100-S Supplemental Manual Download Page 167

Page: 167 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

159

Configure a Send Key via the Phone User Interface

Tap Setting > Features > Key as Send.

Tap inside the Key as Send field to select a key or to disable the feature.

Tap Save.

Send Tone

Send tone allows the phone to play a key tone when a user presses the send key. This

feature works only if key tone is enabled. For more information on key tone, refer to “Key

Tone” on page 160.

Send tone can be configured using the following methods.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure a send tone.
Parameter:

features.send_key_tone

Local

Web User Interface

Configure a send tone.

Navigate to:
http://<phoneIPAddress>/servlet?p=featur
es-audio&q=load

Details of the Configuration Parameter

Parameter

Permitted Values

Default

features.send_key_tone

0 or 1

Description:

Enables or disables the phone to play a key tone when a user presses a send key.

Disabled

Enabled

Note: This feature works only if the value of the parameter “features.key_tone” is set to 1

(Enabled).

Web User Interface:

Features > Audio > Send Sound

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands