126
•
UC-P100-S/UC-P110-S Phones for Skype for Business
Supplemental Guide – DOC. 8412A
If the screen saver is enabled on a phone, the power-saving mode will still occur. For
example, if a screen saver is configured to display after the phone has been idle for 5
minutes, and power-saving mode is configured to turn off the backlight and screen after
the phone has been idle for 15 minutes, the backlight and screen will be turned off 10
minutes after the screen saver displays.
The following power-saving settings can be configured:
•
Office Hour: When the work day starts and the length of each day.
•
Idle TimeOut (minutes): The period of time the phone should be idle before the
screen turns off.
Different timeouts can be specified for office hours (Office Hour Idle Timeout)
and non- office hours (Off Hour Idle Timeout). By default, the Office Hours Idle
Timeout is much longer than the Off Hours Idle Timeout.
A separate timeout period that applies after a key is pressed or the screen is
tapped can be specified as well. This is called the User Input Extension Idle
TimeOut. A User Input Extension Idle TimeOut that is higher than the Office
Hours and Off Hours Idle Timeouts can be set so that when the phone is actively
used, the phone, power-saving mode won’t initiate as often.
NOTE:
To determine which idle timeout applies: When a key is pressed or the screen is
tapped, the idle timeout period that applies (User Input Extension Idle TimeOut or Office
Hours/Off Hours Idle Timeout) will be the timeout with the highest value.
