Crestron UC-P100-S Supplemental Manual Download Page 73

Page: 73 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

Parameter

Permitted Values

Default

static.network.ipv6_internet_port.type

0 or 1

Description:

Configures the Internet (WAN) port type for IPv6.

DHCP

Static IP Address

Note: This feature works only if the value of the parameter “static.network.ip_address_mode” is

set to 1 (IPv6) or 2 (IPv4 & IPv6). If the parameter is changed, the phone will reboot to make the

change take effect.

Web User Interface:

Network > Basic > IPv6 Config

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > WAN Port > IPv6

static.network.ipv6_static_dns_enable

0 or 1

Description:

Triggers the static IPv6 DNS feature to on or off.

Off, the phone will use the IPv6 DNS obtained from DHCP.

On, the phone will use manually configured static IPv6 DNS.

Note: This feature works only if the value of the parameter

“static.network.ipv6_internet_port.type” is set to 0 (DHCP). If the parameter is changed, the

phone will reboot to make the change take effect.

Web User Interface:

Network > Basic > IPv6 Config > IPv6 Static DNS

Phone User Interface:

Menu > Setting > Advanced (default: admin) > Network > WAN Port > IPv6 > Type(DHCP) >

Static DNS

static.network.ipv6_internet_port.ip

IPv6 address

Blank

Description:

Configures the IPv6 address.

Example:

static.network.ipv6_internet_port.ip = 2026:1234:1:1:215:65ff:fe1f:caa

Note: This feature works only if the value of the parameter “static.network.ip_address_mode” is

set to 1 (IPv6) or 2 (IPv4 & IPv6), and "static.network.ipv6_internet_port.type" is set to 1 (Static IP

Address). If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Basic > IPv6 Config > Static IP Address > IP Address

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > WAN Port > IPv6 >

Type(Static IP) > IP Address

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands