Crestron UC-P100-S Supplemental Manual Download Page 67

Page: 67 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

In the PC Port section, select Enabled or Disabled from the Active drop-down

list.

Enter the VLAN ID in the VID (1-4094) field.

Select the desired value (0-7) from the Priority drop-down list.

Click Confirm to accept the change. A dialog box pops up to prompt that the

settings will take effect after a reboot.

Click OK to reboot the phone.

Configure VLAN for Internet Port (or PC Port) via the Phone User Interface

Tap Setting > Advanced

Enter the Admin password (default password: admin), and then tap OK.

Tap Network on the left side of the display, tap 2. VLAN, and then tap 1. WAN

Port.

Set VLAN Status to On or Off by tapping the desired setting

Enter the VLAN ID (1-4094) in the VID Number field.

Enter the priority value (0-7) in the Priority field.

Tap Save. The phone will prompt for a reboot.

Tap OK to reboot the phone.

DHCP VLAN

Skype for Business phones support VLAN discovery via DHCP. When the VLAN Discovery

method is set to DHCP, the phone will examine DHCP option for a valid VLAN ID. The

predefined option 132 is used to supply the VLAN ID by default. The DHCP option used to

request the VLAN ID can be customized.

DHCP VLAN can be configured using the configuration files or locally.

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure DHCP VLAN discovery feature.
Parameters:

static.network.vlan.dhcp_enable

static.network.vlan.dhcp_option

Local

Web User Interface

Configure DHCP VLAN discovery feature.

Navigate to:
http://<phoneIPAddress>/servlet?p=networ
k-adv&q=load

Phone User Interface

Configure DHCP VLAN discovery feature.

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands