Crestron UC-P100-S Supplemental Manual Download Page 295

Page: 295 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

287

Select Enabled or Disabled from the Headset Prior drop-down list.

Click Confirm to accept the change.

Ringer Device for Headset

The Skype for Business phones support speaker and headset ringer devices. The phone

can be configured to specify which ringer device is to be used when receiving an incoming

call. For example, if the ringer device is set to Headset, the ring tone will be played

through the headset.

If the ringer device is set to Headset or Headset&Speaker, the headset should be

connected to the phone and headset mode should be activated in advance. Press the

HEADSET key to activate headset mode.

Ringer device for headset can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the ringer device for the phone.
Parameter:

features.ringer_device.is_use_headset

Local

Web User Interface

Configure the ringer device for the phone.

Navigate to:
http://<phoneIPAddress>/servlet?p=feat
ures-audio&q=load

Details of the Configuration Parameter

Parameter

Permitted Values

Default

features.ringer_device.is_use_headset

0, 1 or 2

Description:

Configures the ringer device for the phone.

Use Speaker

Use Headset

Use Headset & Speaker

If the ringer device is set to Headset or Headset&Speaker, the headset should be connected to

the phone and headset mode should be activated in advance.

Web User Interface:

Features > Audio > Ringer Device for Headset

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands