Crestron UC-P100-S Supplemental Manual Download Page 63

Page: 63 / 422

Supplemental Guide – DOC. 8412A

UC-P100-S/UC-P110-S Phones for Skype for Business

•

Parameter

Permitted Values

Default

static.network.vlan.pc_port_enable

0 or 1

Description:

Enables or disables VLAN for the PC (LAN) port.

Disabled

Enabled

Note: This feature works only if the value of the parameter “static.network.pc_port.enable” is set

to 1 (Auto Negotiation). If the parameter is changed, the phone will reboot to make the change

take effect.

Web User Interface:

Network > Advanced > VLAN > PC Port > Active

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > VLAN > PC Port > VLAN

Status

static.network.vlan.pc_port_vid

Integer from 1 to 4094

Description:

Configures VLAN ID for the PC (LAN) port.

Note: This feature works only if the value of the parameter “static.network.pc_port.enable” is set

to 1 (Auto Negotiation) and the value of the parameter “static.network.vlan.pc_port_enable” is set

to 1 (Enabled). If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > VLAN > PC Port > VID (1-4094)

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > VLAN > PC Port > VID

Number

static.network.vlan.pc_port_priority

Integer from 0 to 7

Description:

Configures VLAN priority for the PC (LAN) port. 7 is the highest priority, 0 is the lowest priority.

Note: This feature works only if the value of the parameter “static.network.pc_port.enable” is set

to 1 (Auto Negotiation) and the value of the parameter “static.network.vlan.pc_port_enable” is set

to 1 (Enabled). If the parameter is changed, the phone will reboot to make the change take effect.

Web User Interface:

Network > Advanced > VLAN > PC Port > Priority

Phone User Interface:

Menu > Setting > Advanced (default password: admin) > Network > VLAN > PC Port > Priority

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Crestron UC-P100-S, Supplemental Manual, Page: 63 / 422

Search results

Summary of Contents for UC-P100-S

Reviews: