Crestron UC-P100-S Supplemental Manual Download Page 130

Page: 130 / 422

122

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Parameter

Permitted Values

Default

screensaver.type

0 or 1

Description:

Configures the type of screen saver to display.

System, the LCD screen will display the built-in picture.

Custom, the LCD screen will display the custom screen saver images (configured by the

parameter “screensaver.upload_url”). If multiple images are uploaded, the phone will display all

images alternately. The time interval is configured by the parameter

“screensaver.picture_change_interval”.

Web User Interface:

Settings > Preference > Screensaver Type

Phone User Interface:

Menu > Setting > Basic > Display > Screensaver > Screensaver Type

Note: This feature is configurable only if custom image file(s) have been uploaded to the phone.

screensaver.upload_url

URL within 511 characters

Blank

Description:

Configures the access URL of the custom screen saver image.

Example:

screensaver.upload_url = http://192.168.10.25/Screencapture.jpg

During the auto provisioning process, the phone connects to the HTTP provisioning server

“192.168.10.25”, and downloads the screen saver image “Screencapture.jpg”.

To download multiple screen saver images to the phone simultaneously, configure as follows:

screensaver.upload_url = http://192.168.10.25/Screencapture.jpg

screensaver.upload_url = http://192.168.10.25/Screensaver.jpg

Note: This feature works only if the value of the parameter “screensaver.type” is set to 1

(Custom).

Web User Interface:

Settings > Preference > Upload Screensaver

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands

Crestron UC-P100-S, Supplemental Manual

Search results

Summary of Contents for UC-P100-S

Reviews:

Related manuals for UC-P100-S

Brands by name

Popular brands