Crestron UC-P100-S Supplemental Manual Download Page 368

Page: 368 / 422

360

•

UC-P100-S/UC-P110-S Phones for Skype for Business

Supplemental Guide – DOC. 8412A

Select Enabled from the Span to PC Port drop-down list.

Click Confirm to accept the change. A dialog box pops up to prompt that

settings will take effect after a reboot.

Click OK to reboot the phone.

Use packet analyzer software to capture the signal traffic.

Enable Watch Dog Feature

The Skype for Business phone provides a troubleshooting feature called Watch Dog,

which helps monitor the phone status and get stack traces from the last time the phone

failed. If the Watch Dog feature is enabled, the phone will automatically reboot when it

detects a fatal failure. This feature can be configured using the configuration files or via

web user interface.

Watch dog can be configured using the configuration files or locally.

Configuration Methods

Central Provisioning

(Configuration File)

<y0000000000xx>.cfg

Configure the Watch Dog feature.
Parameter:

static.watch_dog.enable

Local

Web User Interface

Configure the Watch Dog feature.

Navigate to:
http://<phoneIPAddress>/servlet?p=setti
ngs-preference&q=load

Details of the Configuration Parameter

Parameter

Permitted Values

Default

static.watch_dog.enable

0 or 1

Description:

Enables or disables the Watch Dog feature.

Disabled

Enabled, the phone will reboot automatically when the system crashed.

Web User Interface:

Settings > Preference > Watch Dog

Phone User Interface:

None

Summary of Contents for UC-P100-S







































































































































































































































































































































































































































Crestron UC-P100-S, Supplemental Manual, Page: 368 / 422

Search results

Summary of Contents for UC-P100-S

Reviews: