ComAp InteliLite 4 AMF 20, Global Manual

Page: 256 / 620

InteliLite4 AMF20 Global Guide
256
Group: Maintenance Timers
Subgroup: Maintenance Timer 1
Maintenance Timer 1 RunHours
Setpoint group Maintenance Timers Related FW 1.3.0
Range [units] 0 ... 9 999 [h] / Disabled
Default value Disabled Alternative config NO
Step 1 h
Comm object 13853 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Maintenance timer counts down when engine is running. If it reaches zero, an alarm appears, but the timer
still counts down to negative values. When the value 10 000 (Disabled) is set, the Maintenance function is
disabled and the counter value disappears from controllers statistics.
Reset of the timer can be done by adjusting this setpoint again.
6
back to List of setpoints
Maintenance Timer 1 Interval
Setpoint group Maintenance Timers Related FW 1.3.0
Range [units] 1 .. 36 [month] / Disabled
Default value Disabled Alternative config NO
Step 1 month
Comm object 20583 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Maintenance timer counts down all the time, setting is done in months, but actual Maintenance Timer 1
Interval (page 413) value is displayed and counted in days. If it reaches zero, an alarm appears, but the
timer still counts down to negative values. When the value 37 (Disabled) is set, then the maintenance
function is disabled and counter does not count and the counter value disappears from controllers
statistics.
Reset of the timer can be done by adjusting this setpoint again. Setting of the setpoint does not change
when the reset is done, only the Maintenance Timer 1 Interval (page 413) value changes to reflect reset
of the maintenance timer.
6
back to List of setpoints