ComAp InteliLite 4 AMF 20 Global Manual Download

Page: 159 / 620

InteliLite4 AMF20 Global Guide

159

Firmware upload

Point 1 – controller detects that USB Flash Drive has been inserted.

If the communication via USB is running, the controller will not detect the USB flash drive.

On the other hand if the USB flash drive was detected, communication via USB B port is not possible.

Point 2 – controller is in OFF mode

All operations with USB memory key are possible only in OFF mode

Point 3 – Conditions for firmware upload with current configuration

The new firmware compatible with the version of the configuration in the controller has been detected

(and there is no new configuration file).

Detection is based on the name of firmware

More firmware can be stored on the USB Flash Drive. Controller automatically selects the compatible

firmware with the highest version.

Point 4 – Pop-up message

Do you want to update firmware?

Point 5 – Firmware upload

Current archive is downloaded to USB Flash Drive (Name = SN_YYMMDDHHMM).

New firmware is uploaded into the controller without the change of the configuration

History record "Firmware loaded" is made

Confirming file (.txt) on USB Flash Drive is made (Name = SN_YYMMDDHHMM)

Content: Serial number, Year/Date/Time, Upgrade to the FW "Name of the new FW" successful.

Confirmation pop-up message: "Controller programming successful"

Configuration upload

Point 1 – controller detects that USB Flash Drive has been inserted.

If the communication via USB B is running, the controller will not detect the USB memory key.

On the other hand if the USB flash drive was detected, communication via USB B port is not possible.

Point 2 – controller is in OFF mode

All operations with USB flash drive are possible only in OFF mode

Point 9 – conditions for new configuration upload

The new configuration compatible with the version of the firmware in the controller has been detected

(and there is no new firmware file).

Detection is based on name of configuration – required name: "InteliLite 4-Genset name-M.N.P.B.ail4

Note:

M.N.P.B stands for number 0 – 9."

There can be only one configuration file

Point 10 – Pop-up message

Do you want to update configuration?

Point 11 – Configuration upload

Current archive is download to USB flash drive (Name = SN_YYMMDDHHMM).

New configuration is uploaded into the controller without the change of the firmware

History record "Config loaded" is made

Summary of Contents for InteliLite 4 AMF 20













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for InteliLite 4 AMF 20

Reviews:

Related manuals for InteliLite 4 AMF 20

Brands by name

Popular brands

ComAp InteliLite 4 AMF 20, Global Manual

Search results

Summary of Contents for InteliLite 4 AMF 20

Reviews:

Related manuals for InteliLite 4 AMF 20

Brands by name

Popular brands