InteliLite4 AMF20 Global Guide
136
Image 5.29 Daily mode – InteliConfig
In timer mode select Repeat. In repetition type select Daily. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Then select the xth day of repetition
Timer 1 Refresh Period (page 298)
) and behavior of timer on weekends (
).
Example:
On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be activated again every 3rd day at 12:00 for 1 hour including weekends.
Set-up via controller interface
In controller go to the Scheduler setpoint group. Select the function of timer via
setpoint. Then go to
Timer 1 Setup
and press the Enter button. In
setpoint
select Repeated mode. Then adjust
Timer 1 First Occur. Date (page 293)
and
. In setpoint
select Daily and
adjust
Timer 1 Refresh Period (page 298)
(xth day of repetition) and
(behavior of timer on weekends).
Note:
Use the Left and the Right buttons to move between timer setpoints.
Weekly mode
Set-up via InteliConfig
To set-up timer via InteliConfig go to the setpoint ribbon, setpoint group scheduler and setpoint
Timer 1
Setup
.
Note:
First, the timer functions must be adjusted via setpoint
.
