InteliLite4 AMF20 Global Guide
137
Image 5.30 Weekly mode – InteliConfig
In timer mode select Repeat. In repetition type select Weekly. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Then select the xth week of
repetition (
Timer 1 Refresh Period (page 298)
) and days when timer should be active (
).
Example:
On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be again activated every 2nd week on Monday, Wednesday and Friday at 12:00 for 1 hour.
Set-up via controller interface
In controller go to the Scheduler setpoint group. Select the function of timer via
setpoint. Then go to
Timer 1 Setup
and press the Enter button. In
setpoint
select Repeated mode. Then adjust
Timer 1 First Occur. Date (page 293)
and
. In setpoint
select Weekly and
adjust
(days when timer should be active) and
Timer 1 Refresh Period (page 298)
(xth week of repetition).
Note:
Use the Left and the Right buttons to move between timer setpoints.
Monthly mode
Set-up via InteliConfig
To set-up timer via InteliConfig go to the setpoint ribbon, setpoint group scheduler and setpoint
Timer 1
Setup
.
Note:
First, the timer functions must be adjusted via setpoint
.
