InteliLite4 AMF20 Global Guide
67
Image 5.10 Changing AirGate key
4. Wait for approx 2 – 4 minutes until the controller connects to AirGate. You can see the progress by
observing the value
AirGate status
in InteliConfig
5. When the controller is connected to AirGate it will generate
AirGate ID
for the controller. This AirGate ID is
the "phone number" of the controller.
Note:
If CM3-Ethernet and CM2-4G-GPS are used simultaneously the assigned AirGate ID will be different
for each module, so the controller will be accessible via two different AirGate ID.
Connecting from InteliConfig via AirGate 2.0
AirGate ID
controller addressing ID (see above)
Access Code
leave empty
AirGate Key
AirGate Key adjusted in controller as per description above
AirGate Server
"global.airgate.link:54441"
Username, Password
use your credentials
Object
Description
Not defined
Indicated while the controller is actually not trying to connect to AirGate. This is initial
value of the status.
Wait to
connect
Indicated while the controller is waiting the "repetition period" before next attempt to
connect to a node is performed.
Resolving
Indicated while the controller is resolving domain name of the node to which it is
attempting to connect.
Connecting
Indicated while the controller is attempting to establish TCP link to the node.
Creat sec chan
Indicated while CCS encrypted channel is being negotiated.
Registering
Indicated when the CCS channel has been established until AirGate sends message
"setRuntimeParams" (with any registration status).
AirGate operational and diagnostic information
