manualshive.com logo in svg

COBHAM GR740, User Manual

The COBHAM GR740 User Manual is available for free download from our website. This comprehensive manual provides step-by-step instructions on how to make the most of your GR740 device. Get your hands on the manual today and unlock the full potential of your product.

Share
Download
background image

GR740-UM-DS, Nov 2017, Version 1.7

189

www.cobham.com/gaisler

GR740

Table 183. 

0x00000984-0x00000930 - RTR.PCTRL2 - Port control 2, ports 1-12 (SpaceWire ports and AMBA ports)

31

24 23

16 15 14 13 12 11 10

9

8

6

5

1

0

SM

SV

OR UR R AT AR IT IR RESERVED

SD

SC

0xC0

0x00

1

1

0

1

1

1

1

0x0

0x00

0

rw

rw

rw rw

r

rw rw rw rw

r

rw

rw

31: 24

Time-code / distribute interrupt code truncation mask (SM) - Defines which bits of a time-code / distributed 
interrupt code that must match the value specified in RTR.PCTRL2.SV in order for a packet, for which this port 
is the input port, to be spilled. If a bit in this field is set to 1, the corresponding bit in RTR.PCTRL2.SV must 
match the time-code / distribute interrupt code. If a bit in this field is set to 0, the corresponding bit in 
RTR.PCTRL2.SV does not have to match the time-code / distributed interrupt code.

23: 16

Time-code / distribute interrupt code truncation value (SV) - Defines the value to use together with the 
RTR.PCTRL2.SM field when checking if a time-code / distributed interrupt code should spill a packet for which 
this port is the input port.

15

Overrun timeout enable (OR) - Enables spilling due to overrun timeouts for packets for which this port is the 
input port. See section 13.2.15 for details.

14

Underrun timeout enable (UR) - Enables spilling due to unerrun timeouts for packets for which this port is the 
input port. See section 13.2.15 for details.

13

RESERVED

12

Interrupt acknowledgement code transmit enable (AT) - Enables the transmission of interrupt acknowledgement 
codes on this port. If set to 0, no interrupt acknowledgement codes will be forwarded to this port.

11

Interrupt acknowledgement code receive enable (AR) - Enabled the reception of interrupt acknowledgement 
codes on this port. If set to 0, all received interrupt acknowledgement codes on this port will be silently dis-
carded.

10

Interrupt code transmit enable (IT) - Enables the transmission of interrupt codes on this port. If set to 0, no inter-
rupt codes will be forwarded to this port.

9

Interrupt code receive enable (IR) - Enabled the reception of interrupt codes on this port. If set to 0, all received 
interrupt codes on this port will be silently discarded.

8: 6

RESERVED

5: 1

Static route destination (SD) - When RTR.PCTRL.ST is set to 1, incoming packets on this port will be routed 
based on the value of this field, and the setting of RTR.PCTRL2.SC, instead of the packet’s first byte.

0

Static route configuration (SC) - When this bit is set to 1, the RTR.RTPMAP register corresponding to the phys-
ical address specified by the RTR.PCTRL2.SD field will be used when routing packets, if RTR.PCTRL.ST is set 
to 1.

Table 184. 

0x00000A00 - RTR.RTRCFG - Router configuration / status

31

27 26

22 21

17 16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

0

SP

AP

RESERVED

SR PE IC IS IP AI AT IE RE EE R SA TF ME TA PP

0x08

0x04

0x00

1

1

0

0

0

*

1

*

0

*

0

0

*

0

1

1

r

r

r

r

r

rw rw rw rw rw rw rw rw

r

rw rw wc

r

r

31: 27

SpaceWire ports (SP) - Set to the number of SpaceWire ports in the router. Constant value of 0x08.

26: 22

AMBA ports (AP) - Set to the number of AMBA ports in the router. Constant value of 0x04

21: 16

RESERVED

15

Static routing enable (SR) - This read-only bit specifies that the router’s static routing feature is always globally 
enabled. See section 13.2.9 for details.

14

SpaceWire Plug-and-Play enable (PE) - This read-only bit specifies that the router’s SpaceWire Plug-and-Play 
features are always globally enabled. See section 13.5.4 for details.

13

ISR change timer enable (IC) - If set to 1, the router will wait for the time period specified by the RTR.IRC-
TIMER register after an ISR bit change value, before it allows an incoming interrupt code / interrupt acknowl-
edgement code to change the value of the same ISR bit. If set to 0, the ISR change timers are not used, and an 
ISR bit is allowed to change value again as soon as the previous interrupt code / interrupt acknowledgement 
code has been distributed.

Summary of Contents for GR740









































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GR740

Ratoc Systems SmartMedia Adapter PC Card REX-SMA01F Product Manual preview
SmartMedia Adapter PC Card REX-SMA01F
Brand: Ratoc Systems Pages: 75
Analog Devices ADAU1961 Manual preview
ADAU1961
Brand: Analog Devices Pages: 76
Analog Devices Linear SCP-LT8362-S-EVALZ Demo Manual preview
Linear SCP-LT8362-S-EVALZ
Brand: Analog Devices Pages: 8
IBA ibaFOB-4i-X Manual preview
ibaFOB-4i-X
Brand: IBA Pages: 33
NA DigiNet 416 User Manual preview
DigiNet 416
Brand: NA Pages: 22
Qlogic QLE7xxx Series Quick Start Manual preview
QLE7xxx Series
Brand: Qlogic Pages: 8
ZALMAN ZM-RF1 User Manual preview
ZM-RF1
Brand: ZALMAN Pages: 5
4gon RouterBOARD 411R Quick Start Manual preview
RouterBOARD 411R
Brand: 4gon Pages: 2
Commell FS-A79 User Manual preview
FS-A79
Brand: Commell Pages: 36
Juniper MX480 Hardware Manual preview
MX480
Brand: Juniper Pages: 420
LevelOne FSW-0808TX Quick Start Manual preview
FSW-0808TX
Brand: LevelOne Pages: 3
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Brand: Paradyne Pages: 108
SONIX MP5S Plus Writer Quick Manual preview
MP5S Plus Writer
Brand: SONIX Pages: 23
Kontron MSP8040 Series User Manual preview
MSP8040 Series
Brand: Kontron Pages: 32
Crest Audio NC-MCO - TECHNICAL Technical Data preview
NC-MCO - TECHNICAL
Brand: Crest Audio Pages: 2
Beckhoff EK1122 Documentation preview
EK1122
Brand: Beckhoff Pages: 84
Quatech SSPX-100 User Manual preview
SSPX-100
Brand: Quatech Pages: 5
ekwb EK-Quantum Vector FTW3 RTX 2080 Ti Installation Manual preview
EK-Quantum Vector FTW3 RTX 2080 Ti
Brand: ekwb Pages: 3

Brands by name

Popular brands

Load more brands