Barco Encore, Manual

Page: 209 / 404

Encore Presentation System • User’s Guide 209
5. Menu Orientation
Key Menu
•
V Position — indicates the Key’s position, relative to the vertical center of the
screen ( 00 ), as measured from the exact center of the Key. Thus, the value 64 is
64 pixels above center. To adjust, move the Joystick up and down.
•
Move Rate — adjusts the rate (in 0.1 second increments) for programmed Key
movement, from keyframe to keyframe. To adjust, select the RATE radio button
and twist the Joystick Z-Axis knob.
•
Key Frame Effect — indicates the “motion type” that is used to move the Key
from point to point.
~
If no move is programmed, the display reads [N/A] .
~
If a move is programmed, the motion type is shown (e.g., [Linear] ). The
motion type is selected on the Effects Menu .
•
Press
{
STATS
}
to display the Status Menu . Refer to the “ Status Menu ” section
on page 193 for details.
•
Press
{
KEY
}
to display the Key Menu . Refer to the “ Key Menu Description ”
section on page 204 for details.
•
Press
{
MATTE
}
to display the Matte Menu . Refer to the “ Matte Menu ” section on
page 207 for details.
•
Press
{
EFX
}
to display the Image Effects Menu . Refer to the “ Image Effects
Menu ” section on page 201 for details.
Key Joystick Functions
At the bottom of the Key Adjustment Menu , four radio buttons enable the Joystick to be
assigned to various Key adjustment functions.
•
Press
{
TRACK
}
to lock H Size and V Size together. Regardless of the Key’s
current aspect ratio, its size adjusts proportionally when the Joystick’s Z-Axis knob
or the
SIZE rotary knob is used to change size.
•
Press
{
H SIZE
}
to adjust only the horizontal size, leaving the vertical size alone.
In this way, you can stretch the Key horizontally.
•
Press
{
V SIZE
}
to adjust only the vertical size, leaving the horizontal size as is. In
this way, you can stretch the Key vertically.
•
Press
{
RATE
}
to adjust the move rate of the Key, from keyframe to keyframe.
Please note the following additional related functions:
•
To return the Key to its default size and aspect ratio, press the RESET button in
the Joystick Section .
•
To adjust the Key with fine resolution, press the FINE ADJUST button in the
Joystick Section .