![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756328.webp)
328
Encore Presentation System • User’s Guide
7. Operations
Working with Tallies
tçêâáåÖ=ïáíÜ=q~ääáÉë
The "Tally" function can be enabled or disabled as required.
Use the following steps to enable or disable tallies:
1.
Ensure that your tallies are properly set up. In Chapter 6, refer to the "
Output
Format Setup
" section on page 263 for instructions.
2.
In the
System Keypad
, press
SYSTEM
to display the
System Menu
.
3.
On the
Tally Mode
line:
~
Select
On
to enable all assigned tally relay closures.
~
Select
Off
to disable all assigned tally relay closures.
Please note:
•
Remember that tallies are mapped to inputs. When
Tally Mode
is
On
, if a
"mapped" tally goes to Program, one of the associated eight tally circuits turns on.
•
When the "mapped" input is removed from Program, the associated tally turns off.
•
Tally functionality can be tested. On the
System Menu
, press {
DIAG
} > {
TALLY
}
to initiate the test.
•
In Appendix A, refer to the “
Tally Connector
” section on page 351 for pinout
details.
Summary of Contents for Encore
