Barco Encore, Manual

Page: 307 / 404

Encore Presentation System • User’s Guide 307
7. Operations
Working with Layer Functions
tçêâáåÖ=ïáíÜ=i~óÉê=cìåÅíáçåë
On each Controller, the Layer Functions Section and the Transition Function Section
provide numerous creative modes to enhance your presentation.
The following topics are discussed in this section:
•
Changing the Layer Mode
•
Using Full Screen
•
Using Clone
•
Using Swap Z-order
•
Using Copy
•
Using Freeze
•
Using Black Preview
•
Using Ext Trigger
•
Using Source Preview
•
Using Reset
•
Using Join Mode
`Ü~åÖáåÖ=íÜÉ=i~óÉê=jçÇÉ
„
Use the following steps to change the layer mode:
1. Ensure that the PIP or Key that you wish to change is selected in the Layer
Control Section , and active for modification.
2. In the Layer Functions Section , press PIP to change a Key to a PIP.
3. Press Key to change a Pip to a Key.
rëáåÖ=cìää=pÅêÉÉå
„
Use the following steps to take the active PIP or Key to full screen:
1. Ensure that the PIP or Key is selected in the Layer Control Section , and active
for modification.
2. In the Layer Function Section , press Full Screen . The source’s height will be
used as the parameter that define’s the full screen size.
~
If borders are ON , they will be taken into account and remain visible.
~
Shadows will not be taken into account for the full screen size.
Full
Screen