Barco Encore, Manual

Page: 121 / 404

Encore Presentation System • User’s Guide 121
4. Controller Orientation
Controller Sections
i~óÉê=cìåÅíáçåë=pÉÅíáçå
The figures below illustrate the Layer Functions Section on each Controller model. The
sections are essentially identical, except that the Controller LC has additional functions.
Figure 4-17. Layer Functions Section, Controller SC
Figure 4-18. Layer Functions Section, Controller LC
The buttons in the Layer Function Section enable you to modify the selected layer
(blinking) layer button in the Layer Control Section .
PIP — press to change the selected layer (in the Layer Control Section ) and its
associated source to a PIP. The PIP Adjustment Menu appears on the Touch Screen. In
Chapter 5, refer to the “ PIP Adjustment Menu ” section on page 194 for details.
Key — press to change the selected layer (in the Layer Control Section ) and its
associated source to a Key. The Key Adjustment Menu appears on the Touch Screen. In
Chapter 5, refer to the “ Key Menu ” section on page 203 for details.
Border — (Controller LC only)
•
Press to modify the PIP’s border. The Border Menu appears.
•
Double-punch to turn the border on or off for the selected layer.
In Chapter 5, refer to the “ Border Menu ” section on page 199 for information.
Full Screen — press to take the active PIP or Key to full screen. In each case, the
source’s height is used to define the full screen size.
S
If a source’s original dimension is 1280 x 1024, pressing Full Screen
expands (or reduces) that PIP to fill the output screen vertically. If borders
are
ON , they will be taken into account so that they are visible.
Source
Preview
Move
Setup
Copy Freeze PIP Clone
Swap
Z-order
Frame
Grab
Clear
Layer
All Key
Full
Screen
LAYER FUNCTIONS
Clone Copy
User
Copy
PIP Border Freeze
Swap
Z-order
Source
Preview
Frame
Grab
Move
Setup
Preview
OSD
Key
Full
Screen
Clear
Layer
All
LAYER FUNCTIONS
PIP
Key
Border
Full
Screen