302
Encore Presentation System • User’s Guide
7. Operations
Working with Layers
5.
Crop
— Press
Crop
(in the
Joystick Section
) to display the
Crop Adjustment
Menu
. Select the type of crop, the aspect ratio, and the image’s H and V size. In
Chapter 5, refer to the "
Crop Menu
" section on page 210 for details.
6.
Border
— From the
PIP
,
Shadow
or
Effects
menus, press {
BORDR
} to display
the
Border Menu
. Select the border’s style, color and size. In Chapter 5, refer to
the "
Border Menu
" section on page 199 for menu details.
7.
Shadow
— From the
PIP
,
Border
or
Effects
menus, press {
SHDOW
} to display
the
Shadow Menu
. Choose the shadow’s size, position and transparency. In
Chapter 5, refer to the "
Shadow Menu
" section on page 200 for details.
8.
Special Effects
— From the
PIP
,
Shadow
or
Border
menus, press {
EFX
} to
display the
Image Effects Menu
. Select the desired effect. In Chapter 5, refer to
the "
Image Effects Menu
" section on page 201 for details.
9.
Global Functions
— Remember that the following global functions are available:
~
Press
Reset
(in the
Joystick Section
) to reset the
current effect
(e.g.,
PIP, Key, crop, etc.) to a nominal default value.
~
Press
Full Screen
to bring the PIP to full screen, using the source’s
height as the defining factor. If
Borders
are on, they factor into the
height calculation, so that they will be completely visible on screen.
~
Press
Freeze
to freeze the PIP. Press again to unfreeze.
10.
Transition
— Transition the new look to program with a
CUT
or
AUTO TRANS
.
Refer to the “
Working with Transitions
" section on page 320 for details.
tçêâáåÖ=ïáíÜ=hÉóë=áå=péäáí=jçÇÉ
In
Split Mode
, a mixer’s two layers operate
independently
.
Use the following steps to work with Keys in
Split Mode
.
1.
On the
Destination Bus
, select the desired destination(s).
2.
In the
Layer Control Section
, press the desired layer button:
~
The layer button blinks to indicate that it is active for modification.
~
In the
Source Selection Bus
, the source assigned to the layer blinks.
~
On Preview, the raster box for the selected layer blinks (even if it is
hidden under another layer).
3.
Turn the
Split
button
ON
.
4.
In the
Layer Function Section
, press
Key
to display the
Key Menu
.
5.
On the
Source Selection Bus
, select the desired (new) key source. The button
blinks to indicate that it is selected, and the source appears on Preview.
6.
Adjust the Key. Refer to the “
Modifying Keys
" section on page 304 for details.
7.
Prior to the transition, set up additional PIPs and keys as desired.
8.
Transition the setup to Program. Refer to the “
Working with Transitions
" section
on page 320 for details.
9.
Repeat the procedure from step
1
for the next transition.
Summary of Contents for Encore
