Encore Presentation System • User’s Guide
273
6. System Setup
Input Setup
•
Scroll to the
H Position
line and set the start of the active
area’s horizontal offset from H sync.
•
Scroll to the
V Active
line and set the number of vertical lines in
the image.
•
Scroll to the
V Position
line and set the start of the active area’s
vertical offset from V sync.
•
Press
{
SAVE
}
to save the input configuration.
•
Press
{
BACK
}
to return to the
Input Menu
.
c.
If
Oversample
was selected:
•
Scroll to the
Right Edge
line and adjust as required.
•
Scroll to the
Left Edge
line and adjust as required.
•
Scroll to the
Top Edge
line and adjust as required.
•
Scroll to the
Bottom Edge
line and adjust as required.
•
Press {
SAVE
} to save the input configuration.
•
Press {
BACK
} to return to the
Input Menu
.
9.
Perform additional setups on the
Color Balance Menu
—
if required
:
a.
Press
{
COLOR BALANCE
}
to display the
Color Balance Menu
.
b.
If an
RGB
source was selected:
•
Scroll to the
Red Contrast
line and adjust as required.
•
Scroll to the
Red Brightness
line and adjust as required.
•
Scroll to the
Green Contrast
line and adjust as required.
•
Scroll to the
Green Brightness
line and adjust as required.
•
Scroll to the
Blue Contrast
line and adjust as required.
•
Scroll to the
Blue Brightness
line and adjust as required.
•
Press {
SAVE
} to save the input configuration.
•
Press {
BACK
} to return to the
Input Menu
.
c.
If a
Composite
,
S-Video
or
YP
b
P
r
source was selected:
•
Scroll to the
Saturation
line and adjust as required.
•
Scroll to the
Hue
line and adjust as required.
•
Press {
SAVE
} to save the input configuration.
•
Press {
BACK
} to return to the
Input Menu
.
10.
Repeat from step
4
for the next source that you want to set up.
11.
(For non-stack configurations only) When all sources have been set up for the
selected destination, press
Source Preview
to restore the previous setup.
12.
Repeat from step
1
for the next destination —
only if required
. Refer to the “
Input
Setup Notes
” section on page 274 for details.
Important
If you have not already performed incremental “saves,”
ensure that you press {
SAVE
} before you exit the
Input Menu
— otherwise
all
of your setups will be lost. If you do not save
the input, the next time the source is selected, the input’s
default settings will be displayed.
In addition, the {
SAVE
} function performs the Controller’s
automatic “
Copy Down
” feature, which ensures that
ImagePRO and PrePRO-II units properly process each input.
Summary of Contents for Encore
