Barco Encore, Manual

Page: 18 / 404

18 Encore Presentation System • User’s Guide
NK==fåíêçÇìÅíáçå
Chapter Structure
`Ü~éíÉê=píêìÅíìêÉ
The following chapters provide instructions for all aspects of Encore Presentation System
operations:
•
Chapter 1, “ Introduction ” provides a system overview, and a list of important new
features in this version of the User’s Guide.
•
Chapter 2, “ Hardware Orientation ” on page 39 explains the Encore Presentation
System’s video processor hardware in detail.
•
Chapter 3, “ Hardware Installation ” on page 51 provides comprehensive system
installation instructions.
•
Chapter 4, “ Controller Orientation ” on page 97 describes each section of the
system’s two controllers — the models LC and SC.
•
Chapter 5, “ Menu Orientation ” on page 135 explains the system’s configuration,
setup and adjustment menus, and provides basic menu “navigation” procedures.
•
Chapter 6, “ System Setup ” on page 239 outlines procedures for setting up and
configuring the Encore Presentation System.
•
Chapter 7, “ Operations ” on page 279 provides basic operating instructions.
•
Appendix A, “ Specifications ” on page 341 lists the Encore Presentation System’s
input, output, video, mechanical and power specifications.
•
Appendix B, “ Contact Information ” on page 357 lists important Barco contact,
RMA, warranty and technical support details.
•
Appendix C, “ Upgrading Software ” on page 359 provides a detailed procedure
for upgrading Encore Presentation System software.
•
Appendix D, “ Working With Destinations ” on page 367 outlines the steps
required when Encore is connected to external destinations.
•
Appendix E, “ Application Notes ” on page 375 provides important application-
related information regarding system setup and operations.